Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000


BELT CONVEYORS
BCST 100
BCST 1200
BCST 300
BCST 600
Incline Belt Conveyor
Power Turn Belt Curve
Trough Conveyor


REQUEST FOR QUOTE
Belt Conveyor RFQ.pdf
Standard Belt Curve RFQ.pdf

APPLICATION
Box and Tote Handling
Tire and Wheel Handling
Assembly

INDUSTRY

Distribution and Warehousing
Automotive
Wood and Paper
Industrial Laundry
Parcel


Light Duty Slider and Roller Bed Belt Conveyors

BCST-100

Omni MetalCraft Corp. model BCST-100 conveyor will provide you with a versatile means of handling a wide variety of products from bulky boxes and bundled items to furniture, wood sheets, totes and packaged goods.
Light Duty Slider and Roller Bed Belt Conveyors
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

TECHNICAL DOWNLOADS


Belt Conveyor Catalog.pdf
Belt Conveyor Tech Spec.pdf
Belt Technical Handbook.pdf
Omnithane 150 CxF Black Specifications.pdf
Trackmate Specifications.pdf

Untitled Document

OPTIONAL EQUIPMENT:

Belt
PVC-120 white, Trackmate 120 RT-B rough top, Nitrile, Other types available.

Belt Lacing
Recessed,hidden,vulcanized endless, Other types available.

Conveyor Speed
Constant and variable speeds available other than standard 60 FPM.

Center Drive/Take-Up
Provides additional belt take-up suitable for reversible applications.

Center Take-Up
Provides additional belt take-up. Allows tail pulley location to be closer to the end for better product transition.

Fixed Angle Guide Rails
2 in. or 6 in. formed 12 ga. galvanized angle. Other heights available.

Adjustable Guide Rails
1 5/8 in. x 1 in. formed 12 ga. channel. Adjustable horizontally from edge of belt to 12 in.wider than belt. Available on conveyors with center drives or shaft mounted end drives only.

Floor Supports
Heights available up to 84 in. top of belt.

Ceiling Hangers
5/8 in. dia. x 10 ft. long threaded rod with mounting hardware. Other lengths available.

Other Drive Types
Shaft mount, over-top, side mounted chain driven to allow lower top of belt.

Tail Pulley
6 in. dia. with 1 3/16 in.dia. shaft, crowned.

Motors
Single phase,explosion proof,etc. Available through 2 HP.

Electrical Controls
Start/stop push-button station, Reverse Drum switch,one-direction and reversible magnetic starters.

Nose Roller Ends
1 3/8 dia. (1 in. option) Ideal for small product transfer.

V-Guided Construction
Required if length to belt width ratio is less than 2.5:1.



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.