Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000


BELT CONVEYORS
BCST 100
BCST 1200
BCST 300
BCST 600
Incline Belt Conveyor
Power Turn Belt Curve
Trough Conveyor


REQUEST FOR QUOTE
Belt Conveyor RFQ.pdf
Standard Belt Curve RFQ.pdf

APPLICATION
Assembly
Box and Tote Handling
Tire and Wheel Handling

INDUSTRY

Parcel
Distribution and Warehousing
Automotive
Wood and Paper
Industrial Laundry


Medium Duty Slider and Roller Bed Belt Conveyors

BCST-300

Omni MetalCraft Corp. model BCST-300 welded conveyor will provide you a rigid frame construction for those heavier products in your assembly, sorting or other unit handling applications.
Medium Duty Slider and Roller Bed Belt Conveyors
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

SOLUTION SPOTLIGHTS


Bag Turner 403.pdf
Block Handling Conveyor 401.pdf
Cement Bag Take-Away 405.pdf
Dairy Processing Sanitary Conveyor 402.pdf
Dual Belt Exhaust Conveyor 406.pdf
Dual Direction Discharge Conveyor 407.pdf
Pivot Belt Conveyor 203.pdf
Split Lane Belt Conveyor 409.pdf
Tight Transition Tile Conveyor 408.pdf
Wood Finishing Belt Curve 404.pdf

Untitled Document

SLIDER BED / ROLLERBED BELT CONVEYOR (BCST)

BCST-300 (Medium Duty)

  • Welded Constuction
  • 5 1/2 in. formed 10 ga. channel frame
  • Belt Widths up to 48 in.
  • Drive packages available from 1/3 HP to 2 HP
  • Roller Bed: 1.9 in. dia. rollers with 7/16 in. hex shafts spaced on 6 in. centers.

STANDARD SPECIFICATIONS:

Belt
Black Trackmate 120 EMB with clipper lace

Belt widths
6 in. to 48 in. in full one inch increments.

Bed
10 ga. slider bed pans welded in 5 1/2 in. deep x 10 ga. painted steel channel frames. Standard 5 FT. and 10 ft. long welded sections, with welded-in end couplers.

Floor Supports
3 in. structural channel legs with 4 in. of adjustment. Available up to 89 in. top of belt. One support at every bed joint and at the ends of conveyor

Drive Pulley
4 in. dia. with 1 3/16 in. dia. shaft or 8 in. dia. with 1 7/16 in. dia. shaft or 1 11/16 in. dia. shaft, crowned and fully lagged.

Tail Pulley
4 in. dia. with 1 3/16 in.dia. shaft, 6 in. dia. with 1 7/16 in. dia. shaft, crowned.

Snub Roller
2 1/2 in. dia. with grease packed ball bearings (Adjustable)

Return Rollers
1.9 in. dia. with grease packed bearings.

Take-Up
Provides belt take-up at tail pulley to allow for future belt stretch.

Bearings
Sealed,pre-lubricated,self-aligning ball bearings on drive and tail pulleys.

Conveyor Speed
Constant 60 FPM

Speed Reduction
Sealed worm gear "C" face flanged speed reducer.

Motor
1/2 HP - 230/460V - 3 phase - 60Hz -totally enclosed,fan cooled.

Electrical Controls
Available as option.

Frame Capacity
Maximum load per linear foot with legs on 10 ft. centers = 300 lbs.

For additional equipment options see technical page.



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.