Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000


BELT CONVEYORS
BCST 100
BCST 1200
BCST 300
BCST 600
Incline Belt Conveyor
Power Turn Belt Curve
Trough Conveyor


REQUEST FOR QUOTE
Belt Conveyor RFQ.pdf
Standard Belt Curve RFQ.pdf

APPLICATION
Box and Tote Handling
Tire and Wheel Handling
Assembly
Extreme Environment
Bag Handling

INDUSTRY

Parcel
Distribution and Warehousing
Automotive
Wood and Paper
Textile Mill
Industrial Laundry


Inclined Slider Roller Belt Conveyor

Floor to Floor

Omni MetalCraft Corp. incline belt conveyors are used to transport products up or down between floors or a "Booster Conveyor" to regain adequate height for gravity applications. The curved nose-over provides a smooth transfer from the incline to the horizontal plane.
Inclined Slider Roller Belt Conveyor
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

SOLUTION SPOTLIGHTS


Bag Turner 403.pdf
Block Handling Conveyor 401.pdf
Cement Bag Take-Away 405.pdf
Dairy Processing Sanitary Conveyor 402.pdf
Dual Belt Exhaust Conveyor 406.pdf
Dual Direction Discharge Conveyor 407.pdf
Pivot Belt Conveyor 203.pdf
Split Lane Belt Conveyor 409.pdf
Tight Transition Tile Conveyor 408.pdf
Wood Finishing Belt Curve 404.pdf

Untitled Document

INCLINED SLIDER AND ROLLER BELT CONVEYOR (ICST)

Multiple Models Available
Bolt-Together or Welded Construction Available.

Floor-to-Floor Applications
Reversible (With Center Drive Option)

STANDARD SPECIFICATIONS:

Models Available
Incline belt conveyors are available in the bolt-together galvanized series(light Duty) as well as the welded series (Medium Duty, Heavy Duty and Extra Heavy Duty) Reference the information on the previous pages for the specific series required.

Belt
Black Trackmate 120 RT-B rough top with clipper lace

Nose-Over
Rollers located along an arc provide a smooth transition from incline to horizontal. Available to 30 degrees.
Double nose-overs also available.

Leg Supports
Adjustable floor supports are available up to 84 in. top of leg. Ceiling hangers are recommended above 7 ft. One support is required at every bed joint and at the ends of the conveyor.

Required Dimensions
Must provide the overall length along the floor and the lift to ensure that the conveyor will fit within appropriate parameters.



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.