Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000


BELT CONVEYORS
BCST 100
BCST 1200
BCST 300
BCST 600
Incline Belt Conveyor
Power Turn Belt Curve
Trough Conveyor


REQUEST FOR QUOTE
Belt Conveyor RFQ.pdf
Standard Belt Curve RFQ.pdf

APPLICATION
Box and Tote Handling
Tire and Wheel Handling
Assembly
Extreme Environment
Bag Handling

INDUSTRY

Parcel
Distribution and Warehousing
Automotive
Wood and Paper
Textile Mill
Industrial Laundry


Inclined Slider Roller Belt Conveyor

Floor to Floor

Omni MetalCraft Corp. incline belt conveyors are used to transport products up or down between floors or a "Booster Conveyor" to regain adequate height for gravity applications. The curved nose-over provides a smooth transfer from the incline to the horizontal plane.
Inclined Slider Roller Belt Conveyor
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

TECHNICAL DOWNLOADS


Belt Conveyor Catalog.pdf
Belt Conveyor Tech Spec.pdf
Belt Technical Handbook.pdf
Omnithane 150 CxF Black Specifications.pdf
Trackmate Specifications.pdf

Untitled Document

OPTIONAL EQUIPMENT:

Slaved Power Infeed
Separate belt slave driven by roller chain from tail pulley of inclined conveyor. Center take-up required for incline belt. Contact sales engineer for reversing applications.

Belt
Gum Rubber Rough Top, Nitrile Rough Top, PVC -120 White Rough Top, Trackmate 447 rough top, as well as many other options available.

Belt Lacing
Recessed,hidden,vulcanized endless, other types available.

Conveyor Speed
Constant and variable speeds available other than standard 30 FPM.

Center Drive/Take-Up
Provides additional belt take-up suitable for reversible applications.

Center Take-Up
Provides additional belt take-up. Allows tail pulley location to be closer to the end for better product transition.

Fixed Angle Guide Rails
Available upon request.

Floor Supports
6 in. structural channel legs.

Ceiling Hangers
3/8 in. formed angle mounted to underside of conveyor. Hanging hardware not included.

Other Drive Types
Shaft mount, over-top, side mounted chain driven to allow lower top of belt.

Motors
Single phase, explosion proof, etc. Available through 7 1/2 HP.

Electrical Controls
Start/stop push-button station, Reverse Drum switch, one-direction and reversible magnetic starters.

Nose Roller Ends
Ideal for small product transfer.



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.