Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000


BELT CONVEYORS
BCST 100
BCST 1200
BCST 300
BCST 600
Incline Belt Conveyor
Power Turn Belt Curve
Trough Conveyor


REQUEST FOR QUOTE
Belt Conveyor RFQ.pdf
Standard Belt Curve RFQ.pdf

APPLICATION
Assembly

INDUSTRY

Construction Materials
Wood and Paper
Plastic and Rubber
Manufacturing

Textile Mill


V-Trough Belt Conveyor

BCST-VTR

Omni Metalcraft Corp.has been working with the textile and paper industries for 15 years conveying products from 6" dia. rolls of fabric to 20,000 lbs.rolls of paper. Our V-Troughed roller and slider bed design is a proven winner in the industry for our customers.
V-Trough Belt Conveyor
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

TECHNICAL DOWNLOADS


Belt Conveyor Catalog.pdf
Belt Conveyor Tech Spec.pdf
Belt Technical Handbook.pdf
Omnithane 150 CxF Black Specifications.pdf
Trackmate Specifications.pdf

Untitled Document

STANDARD EQUIPMENT:

Belt:
Black Trackmate 120 EMB with carded clipper lace (Other belt/splice types available)

Belt Widths:
18 in. to 36 in. in full one inch increments (Other widths available upon request)

Bed:
7 ga formed pan (slider) or 2 1/2" diameter rollers on 6" centers with center rail (Cross or "X" roller bed also available)

Frame:
7 ga. painted steel channel frames. Standard 5 ft. and 10 ft. long welded sections with welded-in end couplers. Depth is dependant on trough angle required

Trough Angles:
5°, 10° and 15° (other angles available up to 15° max)

Floor Supports:
4 in. structural legs with 4 in. of adjustment. Available up to 89 in. top of belt. One support at every bed joint and at the ends of the conveyor

Drive pulley:
Minimum 8 in. diameter with 1 7/16 in. diameter shaft, crowned and fully lagged (based on HP/Load information)

Tail/Take-up Pulley:
Minimum 6 in. diameter with 1 3/16 in. diameter shaft, crowned (based on HP/Load information)

Snub Roller:
2 1/2 in. diameter or 3 1/2 in. diameter with grease packed bearings (adjustable)

Return Roller:
1.9 in. diameter with grease packed bearings

Take-Up:
Provides belt take-up at tail pulley to allow for future belt stretch

Bearings:
Sealed, pre-lubricated, self-aligning ball bearings on drive and tail/take-up pulleys

Conveyor Speed:
Constant 30 FPM (other speeds available on request)

Speed Reduction:
Sealed worm gear "C" face flanged speed reducer

Motor:
230/460 V - 3 phase - 60 Hz - totally enclosed fan cooled

Electrical Controls:
Available upon request

Frame Capacity:
Maximum load per linear foot with legs on 10 ft. centers = 620 lbs.

 



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.