CHAIN DRIVEN LIVE ROLLER CONVEYOR (CDLR)

CDLR 2.5 / 2-9/16" (Medium Duty)

• Positive Drive
• 2.5 inch diameter x 11 ga. rollers or 2 9/16 in. diameter x 0.180 in. wall rollers
• Reversible with speeds ranging from 5 - 150 FPM fixed or variable speed
• Effective Widths from 3" - 95 " in any increment
• Lengths from 1 ft. thru 12 ft.
• Built to Order - modifications easily made

STANDARD SPECIFICATIONS:

Frame
5 in. x 6.7# or 6 in. x 8.2# structural channel with welded cross members. Optional structural angle available on one side for rollers high. Welded in butt couplers allow sections to be bolted together.

Effective Widths
3 through 95 inch in any increment (Other widths available)

Side Mount Drive
Available mounted high or low

Drive Chain
No. 40, 50, 60 or 80 chain dependent upon chain pull requirements.

Chain Guard
10 gage formed steel upper and lower. Lower portion welded to bottom of frame: upper portion bolted to top of side frame to totally enclose drive chains.

Rollers
2 1/2 in. diameter x 11 gage or 2 9/16 in. diameter x 0.180 in. wall steel tubing with (2) Type A sprockets welded to tube. Bearings are sealed and grease packed. Capacity = 580 lbs. per roller. For more information see Technical Info page.

Axle
11/16 in. pin retained hex axle. Spring retained optional.

Motor
1/4 HP through 5 HP - 230/460V- 3 phase 60Hz., totally enclosed, fan cooled, "C" face.

Speed Reducer
Sealed worm gear "C" face speed reducer.

Electrical Controls (Optional)
Reversing or non reversing motor starter mounted and wired or shipped loose. Additional control devices available.

Capacity
Maximum recommended weight per product on 2.5" rollers 3500# - see load capacity chart on Technical Info page.

For additional equipment options see technical page.