CHAIN DRIVEN LIVE ROLLER CONVEYOR (CDLR)
CDLR 3.5 (Heavy Duty)
- Positive Drive
- 3.5 inch diameter x 0.300 inch wall rollers
- Reversible with speeds ranging from 5 - 150 FPM fixed or variable speed
- Effective Widths from 3" - 120 " in any increment
- Lengths from 1 ft. thru 12 ft.
- Built to Order - modifications easily made
7 in. x 9.8# or 8 in. x 11.5# structural channel with welded cross members. Optional structural angle available on one side for rollers high. Welded in butt couplers allow sections to be bolted together.
3 through 120 inch in any increment (other widths available)
Side Mount Drive
Available mounted high or low.
No. 60, 80, or 100 chain dependent upon chain pull requirements.
Formed steel upper and lower. Lower portion welded to bottom of frame: upper portion bolted to top of side frame to totally enclose drive chains.
3.5 in. diameter x 0.300 in. wall steel tubing with (2) Type A sprockets welded to tube. For location see chart on Technical Info page.
1 1/16 in. pin retained hex axle.
1 1/16 in. hex axle with sealed semi-precision bearing or 1 1/8 hex axle or 1 7/16 round axle, both with sealed precision bearings.
1/4 HP through 7 1/2 HP - 230/460V- 3 phase 60Hz., totally enclosed, fan cooled, "C" face.
Sealed worm gear "C" face speed reducer.
Electrical Controls (Optional)
Reversing or non reversing motor starter mounted and wired or shipped loose. Additional control devices available.
Not to exceed frame and total roller capacity. See Technical Info page.
For additional equipment options see technical page.