Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000


CHAIN DRIVEN LIVE ROLLER
CDLR 1.9
CDLR 2.5 and 2 9-16
CDLR 3.5
CDLR 4.0
CDLR 5.0
ZP Chain Driven Live Roller


REQUEST FOR QUOTE
CDLR Curve RFQ.pdf
CDLR RFQ.pdf
Zero Pressure CDLR RFQ.pdf

APPLICATION
Drum Handling
Pallet Handling
Tire and Wheel Handling
Accumulation
Stacking and Destacking
Heavy Loads
Robotic Cells
Washdown

INDUSTRY

Construction Materials
Cabinetry, Furniture
and Wood Finishing

Appliance
Food and Beverage
Metal and Steel
Automotive
Industrial Manufacturing
Foundry


Extra Heavy Duty Chain Driven Live Roller Conveyor

CDLR 4.0

Omni MetalCraft Corp. 4.0 inch Chain Driven Live Roller Conveyor will provide you with a versatile means of handling a wide variety of loaded pallets, drums and a mulititude of other heavy loads.

Extra Heavy Duty Chain Driven Live Roller Conveyor
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

TECHNICAL DOWNLOADS


CDLR Catalog.pdf
CDLR Technical Handbook.pdf
CDLR Tech Spec.pdf

Untitled Document

Note: Effective widths, lengths and roller spacing's
listed are only general guidelines. Many variations
are easily accommodated.




Chain Driven Live Roller Conveyor 4.0

Roller Dia.
Chain
Sprocket
Roller Centers
Frame
Optional Side Frame
A
B
C
D
Channel
Angle
4
RC60
60A22
6 3/8 " & up in 3/8" increments
7 x 9.8#
5 x 6.7#
5 x 3 x 5/16
4"
3 1/2"
1 1/4"
1 1/4"
4
RC80
80A17
7" & up in 1/2" increments
8 x 11.5#
6 x 8.2#
6 x 4 x 1/2
4 1/4"
4 1/2"
1 1/4"
1 3/4"
4
RC100
100A14

7 1/2" & up in 5/8" increments

8 x 11.5#
6 x 8.2#
6 x 4 x 1/2
5"
4 1/2"
1 3/8"
2"

Standard - Rollers Low

Standard - Rollers Low

Special Close Roller Centers

Roll Diameter
Sprocket
Min. Roll Centers

"A" Chain Guard Width

4
60A22
5 1 /4"
6 1/2"
4
80A17
5 1/2"
7 3/4"
4
100A14
5 5/8"
9"

Load Capacity Chart

HP
Chain Driven Live Roller Bed @ 30 FPM
Total Uniform Load (Lbs.)*
Up to 20 feet
Up to 50 Feet
2
24,200
15,500
3
39,300
30,600

*Capacities bases on 75 " effective width and 8 3/4 " approximate roller centers for 4" roller. Chain size dependent upon chain pull requirements.

OPTIONAL EQUIPMENT:

Built to Your Specifications:
Effective widths, lengths and roller spacing's listed in this catalog are only general guidelines. And variation is easily accommodated. Notches, special drive bases, multiple lanes, etc. can be provided. Conveyors can be built directly from your blueprints.

Drive Below and Within:
Reducer-motor unit mounted underneath conveyor and within the side frames

Conveying Speed:
Several constant and variable speeds are available. Variable speed options include DC motor and controller, AC frequency controllers and variable pitch sheaves. Note: Capacity is affected by speed change.

Spurs:
30° and 45° spars available. Built to customer requirements. Specify length of long rail and effective width. Refer to straight sections for roller, sprocket and frame combinations.

Other Rollers:
Other roller and bearing options are available

Every Other Roller Powered:
This option allows rollers to be spaced closer together. Example for 2 1/2 in. diameter rollers with 60A15 sprockets: With EVERY roller powered, roller centers are limited to 4 1/2in. to allow for sprocket clearance. With EVERY OTHER roller powered, 3 in. roller centers are possible. Warning- Special safety consideration required.

Powered Both Sides:
Allows rollers to be spaced closer together with every roller powered. Every other roller driven on one side and remainder of rollers driven on opposite side. Chain guards both sides. Specify effective width.

Coated Rollers :
Rollers available zinc plated, urethane coated or teflon coated.

Clutch:
Mounted between motor and reducer. Provides soft start and intermittent overload protection.

Brake:
Mounted between motor and reducer. Provides fail-safe stopping of conveyor when motor is not running.

Diverter Arm:
Divert flow of product from main conveyor line to spur line. Mounted to side of conveyor. Manual or pneumatically operated.

Pop-Up Stops:
Manual or pneumatically operated roller, blade or pin stops mounted to underside of conveyor. Raises above conveyor surface to stop product.

Other Equipment offered as accessory to CDLR:
Chain Transfers, Scissor Lifts, Chain Conveyor, Turn Tables, Transfer Cars



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.