Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000


LINESHAFT CONVEYOR
LSDS 1.4
LSDS 1.9


REQUEST FOR QUOTE
Lineshaft RFQ.pdf
Zero Pressure Lineshaft RFQ.pdf

APPLICATION
Bag Handling
Box and Tote Handling
Singulation
Accumulation
Robotic Cells

INDUSTRY

Construction Materials
Parcel
Distribution and Warehousing
Food and Beverage


Lineshaft Driven Live Roller Conveyor

LSDS 1.4

The Lineshaft Driven Live Roller Conveyor is a unique concept in powered conveyors. It has the capability of accumulating products with minimum back pressure. Typical characteristics include quiet operation and easy maintenance.


Lineshaft Driven Live Roller Conveyor
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

TECHNICAL DOWNLOADS


Lineshaft Catalog.pdf
Lineshaft Driven Roller Conveyor Tech Spec.pdf
Lineshaft Technical Handbook.pdf

Untitled Document

Lineshaft Driven Live Roller Conveyor 1.4

 

 

 

 

 

 

 

Between Frame Width
Weight (lbs.)
Drive Section (ft.)

Drive Section (ft.)

Slaved Sections (ft.)
3'
10'
1'
2'
3'
4'
5'
6'
7'
8'
9'
10'
13"
147
343
32
56
79
102
128
152
175
201
225
248
14"
150
352
33
57
82
106
133
157
181
208
232
257
15"
154
361
34
59
84
109
137
162
187
215
240
265
16"
157
370
35
61
87
113
141
167
193
222
248
274
17"
160
379
36
63
90
116
146
172
199
229
255
282
18"
163
388
37
65
92
120
150
178
205
236
263
290
19"
166
397
38
67
95
123
155
183
211
242
271
299
20"
169
406
39
68
97
127
159
188
217
249
278
307
21"
173
415
40
70
100
130
163
193
223
256
286
316
22"
176
424
41
72
103
133
168
198
229
263
294
324
23"
179
433
43
74
105
137
172
203
235
270
301
333
24"
182
442
44
76
108
140
176
209
241
277
309
341
25"
185
451
45
78
111
144
181
214
247
284
317
350
26"
188
460
46
79
113
147
185
219
253
291
324
358
27"
192
469
47
81
116
151
189
224
259
297
332
367
28"
478
478
48
83
119
154
194
229
265
304
340
375

 

OPTIONAL EQUIPMENT:

Keyed Spools:
Spools are keyed and fit into a keyseat on the drive shaft. Instead of slipping on the shaft, spools provide positive drive. NOTE: Keyed spool conveyor sections cannot exceed 4 ft. long.

Speed-Up Spools:
Larger diameter spools that increase speed 1.3 times the original speed.

Pneumatic Roller Brake :
Air operated conveyor accessory that stops rollers in 2 ft. or 3 ft. zones.

Blade Stops :
Pneumatically or manually operated blade that pops up between rollers in order to accumulate product.

Timing Belt Drive :
Used as an option to chain drive, allowing for quieter operation. Timing belt drive is required at speed of 120 FPM.

Roller Centers :
3 in., 4 1/2 in. and 6 in. roller centers are also available.

Powered Crossover:
1 foot long section that switches drive shaft from one side of the conveyor to the other. Timing belt and chain driven models available. Can also be used to increase speed.

External Jump Chain :
3 ft. long section with a jump chain that transmits power from one conveyor line to a parallel conveyor line. One drive can power two parallel lines. Chain driven and timing belt driven models available. Can also be used to increase speed.

Conveying Speed:
Constant and variable speeds from 25 to 120 FPM. AC or DC variable speed controllers available.

Urethane Belt Transfer :
3 ft. long section has an air operated lifting device that raises urethane belts above the roller surface to transfer product off @ 90°.

Spring Assisted Gate Section :
6 ft. section consisting of 2 ft. fixed section and 4 ft. gate section.

Guard Rails:
1 1/2 in. wide x 2 in. high x 12 ga. galvanized steel formed angle. One or both sides. Note: If product contact guard rails, product flow may be affected.

Floor Supports:
Available in higher or lower height adjustments.

Ceiling Hangers:
5/8 in. diameter x 10 ft. long threaded rod with mounting hardware.

Other Rollers:
1 3/8 in. diameter x 18 ga. or 1 3/8 in. diameter x 3/16 in. wall tubing. Closed style non-precision bearings also available.

Motors:
Single phase, drip proof, DC motors, inverter duty motors available through 2 HP.

Electrical Controls:
Start-Stop push button stations, reversing drum switch, one direction and reversible magnetic starters.

Side Mount Drive :
Allows minimum top of roller height of 10 3/4 inches. Note: Motor is vertical.



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.