Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000


LINESHAFT CONVEYOR
LSDS 1.4
LSDS 1.9


REQUEST FOR QUOTE
Lineshaft RFQ.pdf
Zero Pressure Lineshaft RFQ.pdf

APPLICATION
Bag Handling
Box and Tote Handling
Singulation
Accumulation
Robotic Cells

INDUSTRY

Construction Materials
Parcel
Distribution and Warehousing
Food and Beverage
Battery
Consumable Goods
Glass


Lineshaft Driven Live Roller Conveyor

An Energy Efficient Means of Conveying

Lineshaft Conveyors are an optimum solution for conveyance of light (up to 15 lbs/roller) loads, at speeds of 25-120 FPM. They are designed for flat-bottomed, evenly distributed loads, such as those found in distribution and warehousing, food packaging and parcel handling. Clean, dry, oil free environments are the ideal conditions to maximize Lineshaft performance.
Lineshaft Driven Live Roller Conveyor
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

TECHNICAL DOWNLOADS


Lineshaft Catalog.pdf
Lineshaft Driven Roller Conveyor Tech Spec.pdf
Lineshaft Technical Handbook.pdf

Conveyor Frame - Heavy duty welded construction with structural tube chain rails

Frame Size: 

§  Formed channel, 5 ½ deep x 1 ½” flange x 12 ga.

 

Frame Construction:

§  Bolt together:

    • Galvanized (standard)
    • Mild steel and finish coat (optional)

  • Welded:
    • Mild steel formed and finish coat

 

Between Frame Widths:

§  13” through 28” for 1.4” OD rollers

  • 13” through 39” for 1.9” OD rollers

 

Finish coat options:

§  Enamel Paint (Spray)

  • Powder coat (RAL colors)

 

Roller Specifications:

§  1.4” OD rollers on 1 ½” centers (standard)

  • 1.9” OD rollers on 3”, 4”, 6” and 8” centers (standard)

 

Drive Shaft:

§  1” dia. steel shaft runs full length of conveyor with Delrin coupling at bed joints.

 

Drive Spools:

§  2” dia. Delrin spool held in place on shaft with snap-on retaining ring.

 

Drive Belts:

§  3/16” dia. urethane belt from drive spool to rollers

 

Bearings:

§  Sealed, self-aligning, pre-lubricated ball bearings support the drive shaft.

 

Drive Package:

§  Motor and reducer mounted underneath the conveyor is standard. (The motor extends beyond the conveyor frame if the BF is less than 20”)

  • Drive mounting options:
    • Under-hung (21 ¼” min. top of roller)
    • Side Mounted (10 ¾” min. top of roller)
    • Timing belt or Chain drive available

 

Motor:

§  ½ hp – 230/460V-3ph-60hz-TEFC-1750 RPM (Standard)

  • Available options:
    • 115V and 230V single phase
    • 208V, 230V, 460V and 575V three phase

 

Speeds:

§  25 to 120 FPM (Consult Omni for speeds over 120 FPM)

 

Load Capacity:

§  Max load per roller:

    • 10 lbs for 1.4” OD rollers
    • 15 lbs for 1.9” OD rollers

  • Max driven length with one drive mounted centered
    • 70 feet for 1.4” OD rollers
    • 120 feet for 1.9” OD rollers

  • Max product load:
    • 75 lbs per individual product. (Consult Omni for heavier loads)

Lineshaft_Graphic



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.