Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000




REQUEST FOR QUOTE
Turntables RFQ.pdf

APPLICATION
Drum Handling
Pallet Handling
Tire and Wheel Handling
Rack Storage
Robotic Cells

INDUSTRY

Appliance
Construction Materials
Distribution and Warehousing
Cabinetry, Furniture
and Wood Finishing

Automotive
Foundry
Battery
Consumable Goods
Glass


Turntables

Providing more options

Turntables are useful for providing directional change in your conveying line. A section of conveyor is attached to the table service and is then rotated to the desired position. Turntables are used for loading and unloading pallets and containers, as well as, improving the ergonomics of workstations.
Turntables
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

TECHNICAL DOWNLOADS


Turntables Catalog.pdf
Turntables Tech Spec.pdf
Turntable Technical Handbook.pdf

Manual Turntables

§  Standard Specifications:

§  Base Frame - Welded structural channel or tube provides rigid support for table top and table top supports in both light duty and heavy duty models

§  Top Plate - Rigid, flat sheet top plate provides clean work surface

§  Turntables can be equipped with a conveyor deck, per customer specifications. Other options are available.

§  Rotation - Standard table rotations of 90°, 180° or 360°. Other rotations are available upon request.

§  Detents - Manually operated or spring loaded detents orient table top at 90° increments on all manually operated units. Special increments are available. Manually operated detents can be actuated by hand or foot on request.

 

§  Standard Options:

§  Limit switches or proximity switches to determine position of table top

§  A slip ring to route power through center of table to rotating deck of turntable. A slip ring may affect the minimum height of table

§  Rotary union to route air or hydraulic oil to rotating deck of turntable. Rotary unions may affect the minimum height of table

§  Gravity transition rollers are standard on units that incorporate a conveyor deck. These transition rollers, which are attached to the rotating part of the turntable, are used to assist in supporting products during the transition from adjoining conveyor to the turntable. Powered transition rollers are also available to aid problem products. Fixed transition rollers can also be mounted to adjoining conveyor.

 

 

Low Profile Turntables

§  Standard Features:

§  One of the lowest heights in the industry

§  Sealed for life yoke rollers

§  Thick steel top platform

§  Base with pre-drilled holes for mounting

§  Corners of table top clipped for safety

 

§  Standard Options:

§  Multiple platform sizes available

§  Round top platform

§  Detent positioning stop

§  Manual positioning stop

§  Self supporting stop

§  Rotary bearing for lower rotational force

 

 

Powered Turntables

§  Standard Specifications:

§  Base Frame - Heavy duty welded structural channel or tube provides rigid support for table top and table top supports in both light duty and heavy duty models

§  Top Plate - Rigid, flat sheet top plate provides clean work surface. Turntables can be equipped with a conveyor deck, per customer specifications. Other options are available.

§  Rotation - Standard table rotations of 90°, 180°, 270° or 360°. Other rotations are available upon request

§  Drive - Chain drive located either underneath or externally on powered turntables. Sealed worm gear “C” face reducer powered by 230/460V, 3 Ph., 60 Hz. brake motor. Drive is protected by a torque limiter on the reducer shaft. Gear drives are an option with the use of a rotary bearing, as well as air/hydraulic cylinders for 90°

§  Stops - Adjustable rubber bumper stops where applicable on powered units allow positioning of table top and absorb shock upon stopping

 

§  Standard Options:

§  Limit switches or proximity switches to determine position of table top

§  A slip ring to route power through center of table to rotating deck of turntable. A slip ring may affect the minimum height of table.

§  Rotary union to route air or hydraulic oil to rotating deck of turntable. Rotary unions may affect the minimum height of table.

§  Inverter duty motor, air motor, hydraulic motor

§  Gravity transition rollers are standard on units that incorporate a conveyor deck. These transition rollers, which are attached to the rotating part of the turntable, are used to assist in supporting products during the transition from adjoining conveyor to the turntable. Powered transition rollers are also available to aid problem products. Fixed transition rollers can also be mounted to adjoining conveyor.

 



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.