Omni Metalcraft Corp.
P.O. Box 352  -  Alpena MI, 49707  -   ph: 989.358.7000




REQUEST FOR QUOTE
No Worksheets Available



Ultrex® Sleeves

Quick Accumulation Solution

Ultrex® sleeves are hard plastic sleeves that fit loosely over a roller. The main purpose of Ultrex® sleeves is to allow a powered conveyor to accumulate product without damaging the rollers or the product.
Ultrex® Sleeves
OVERVIEW MAIN ACCESSORIES PAGE      

There is enough friction between rollers and sleeves that products can be conveyed normally even though the sleeves are not fixed to the rollers.  When products are stopped the sleeves are free to stop with the product which prevents damage to the product.  The rollers continue to rotate inside the sleeves.  The smooth surface of the Ultrex® slides freely over metal rollers without damaging the sleeve or the roller. 

Ultrex® sleeves are made form a high impact plastic that can also be used to protect the rollers from being dented or scratched.  Dents in tubing create stress points that can fatigue the material over time.  This makes the tube susceptible to permanent deflection where it can become bowed and out of round.   Ultrex® sleeves resist denting much better than metal roller tubes.  They also distribute impact loads across the length of the tube preventing further deflection and damage.  If the Ultrex® sleeves are damaged they are much easier and more cost effective to replace than rollers.

For more covering options see our coatings page.

 



 
   Contact Us  |  Home  |  Employment  |  © 2008, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright © 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.