Omni Metalcraft Corp.
P.O. Box 352  -  Alpena MI, 49707  -   ph: 989.358.7000

Omni SMV.pdf

AC Variable Speed Drives

Controls Integration

AC Controllers offer a wide range of options for motor controls such as variable speed, soft start/stop, preset speeds and multi-motor control. The standard controller comes in a Nema 1 enclosure.
AC Variable Speed Drives

AC Variable Speed Drives

§  Drives range up to 600VAC and 20 HP

§  Standard drive is capable of a 10:1 speed ratio up to 5 HP

§  Available in single or three phase; non-reversing or reversing

§  Standard enclosure is rated Nema 1.  Can be upgraded to Nema 4X/12

§  Can be combined with a remote mounted push button station, foot pedal or hand pendant

§  A photoeye can be wired to the starter and used for stopping the conveyor as well as an auto-stop/restart function

§  Can be shipped loose, mounted only or mounted to the conveyor and wired to motor

§  Power cord and plug available for 115v- 1ph- 60 HZ up to 3/4 HP, power cord less plug only for other voltages

§  Other control options and VFDs are available


   Contact Us  |  Home  |  Employment  |  2008, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.