Omni Metalcraft Corp.
P.O. Box 352  -  Alpena MI, 49707  -   ph: 989.358.7000




REQUEST FOR QUOTE
No Worksheets Available



DC Variable Speed Drives

For Additional Control

A DC controller offers a cost effective solution to variable speed motor control. Standard drive includes armature and line fusing, overload protection, power on indicator, speed pot and an on/off switch. It also contains internal adjustments for soft start/stop and maximum/minimum speeds. Enclosure is a Nema 1.
DC Variable Speed Drives
OVERVIEW MAIN CONTROLS PAGE      

DC Variable Speed Drives

 

§  Controller has selectable input line voltage of 115 or 230V AC single phase.  The output voltage will be 90 or 180V DC depending on input voltage

§  Standard drive is capable of a 10:1 speed ratio up to 2 HP

§  A Forward/Brake/Reverse toggle switch can be installed in the standard drive for reversing applications

§  Standard enclosure is rated Nema 1.  Can be upgraded to Nema 4X/12

§  Optional drive can be combined with a remote mounted push button station, foot pedal or hand pendant

§  A photo-eye can be wired to an optional drive for stopping the conveyor as well as an auto-stop/restart function

§  Can be shipped loose, mounted only, or mounted to the conveyor and wired to the motor

§  Power cord and plug available for 115V-1ph-60hz up to 3/4 HP, power cord less plug only for other voltages

§  Standard DC controllers is not to be used with any other control devices

 



 
   Contact Us  |  Home  |  Employment  |  2008, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.