Omni Metalcraft Corp.
P.O. Box 352  -  Alpena MI, 49707  -   ph: 989.358.7000

No Worksheets Available

Zero Pressure Accumulation Sensors

For Additional Control

Non contacting products move down a conveyor in singulation mode or can be slug released for mass product movement. Complete control packages are available for the accumulating conveyor, either with the use of a standard sensor and PLC system or an optional style sensor that has zero pressure logic self contained in each sensor.
Zero Pressure Accumulation Sensors

Zero Pressure Accumulation Sensors


§  The standard photo-eye and solenoid valve can be placed in each zone for customer controlled zero pressure logic.  Components can be wired to a junction box as an option.  (See photo electric sensors for complete description of standard photo-eye)

§  The optional style sensor and solenoid valve with built in zero pressure accumulation logic can be pre-assembled on the conveyor for easy reconnection at installation, with a considerable cost savings over the standard photo-eye PLC logic.

§  Sensors with built-in logic operate at 24VDC.  A 24VDC power supply is provided with each system and requires a 115 or 230VAC short circuit protected supply voltage.

§  Motor controls can be added to either package for a stand alone system

§  Sensors can be shipped loose, mounted only or mounted to conveyor and wired to a junction box.  Complete zero pressure control logic systems are also available.


   Contact Us  |  Home  |  Employment  |  2008, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.