Omni Metalcraft Corp.
P.O. Box 352  -  Alpena MI, 49707  -   ph: 989.358.7000




REQUEST FOR QUOTE
No Worksheets Available



Reversing Drum Switch

For Additional Control

A reversing, manual starter in a Nema 1 enclosure. Use a drum style switch for forward/off/reverse motor control.
Reversing Drum Switch
OVERVIEW MAIN CONTROLS PAGE      

Reversing Drum Switch

 

§  Up to 1-1/2 HP at 115VAC, single phase

§  Up to 2 HP at 230VAC, single phase

§  Up to 2 HP at 460VAC, three phase

§  Can be shipped loose, mounted only or mounted to conveyor and wired to motor

§  Power cord and plug available for 115v-1ph-60hz up to 3/4 HP, power cord less plug only for other voltage

 

Please note, this device has no overload or short circuit protection.  The manual starter is not to be used with any other control devices.

 



 
   Contact Us  |  Home  |  Employment  |  2008, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.