Omni Metalcraft Corp.
P.O. Box 352  -  Alpena, MI 49707  -   ph: 989.358.7000


ROLLERS
Galvanized Sprocketed
Gravity
Grooved
Sprocketed
Tapered


REQUEST FOR QUOTE
Concave-Bowtie Roller RFQ.pdf
Gravity Roller RFQ.pdf
Grooved Roller RFQ.pdf
Roller Quote Sheet RFQ.pdf
Sprocketed Roller RFQ.pdf
Taper Roller RFQ.pdf

APPLICATION
Extreme Environment
Drum Handling
Pallet Handling
Box and Tote Handling

INDUSTRY

Food and Beverage
Automotive
Distribution and Warehousing
Metal and Steel
Construction Materials


Rollers

Tapered Rollers

Tapered Rollers are available as true tapers and standard tapers for gravity, sprocketed, and grooved applications. True tapers are designed to maintain orientation of the product based on the dimensions of the curve. Omni also offers approximately a dozen taper rates that are standard throughout the industry.
Rollers
OVERVIEW TECHNICAL INFO LITERATURE MULTI-MEDIA ACCESSORIES

TECHNICAL DOWNLOADS


OMC Bearing Index.pdf
OMC Roller Catalog.pdf
OMC Roller Index.pdf
OMC Stainless PVC Roller Catalog.pdf
Roller Cataloging Sheet.xlsm
Roller Options.pdf

Tubes

§  For Standard Tapers:

§  2 1/2” to 1 11/16” in 11 ga. material

§  1 1/2” to 1” in 18 ga. material

§  Maximum length of 39”

§  Materials include Mild Steel, Galvanized Steel, and Stainless Steel for certain size


§  Coatings include Urethane and Vinyl Sleeves, Cast Urethane Coatings, Millable Urethane Coatings and Vulcanized Rubber Coatings

§  Plating options for Zinc, Chrome, or Nickel

§  For True Tapers:

§  Large end sizes up to 8” diameter

§  Small end sizes down to 1 3/8” diameter depending on large end

§  All tubes are 11 ga.

§  Maximum length of 60”

§  Materials include Mild Steel, Galvanized Steel, and Stainless Steel for certain sizes                       


§  Coatings include Urethane and Vinyl Sleeves, Cast Urethane Coatings, Millable Urethane Coatings and Vulcanized Rubber Coatings

§  Plating options for Zinc, Chrome, or Nickel

§  Assembly Options Include:

§  Press Fit

§  Crimped (Swaged)

§  Welded End Plates (Bosses) with internal bearings

§  Fully Welded Tube & Axles

 

Axles

§  Sizes range from 1/4” to 3 7/16”

§  Shapes include Hex, Round, or Square

§  Materials include Mild Steel and Stainless Steel

§  Axle Retentions include:


§  Spring                          

§  Cotter Pin                     

§  Hog Ring                      

§  Snap Ring

§  Tapped Ends

§  Threaded Ends

§  Milled Flats

§  Keeper Bar Slot            



Bearings

§  Non-Precision

§  A full ball complement in a stamped metal body

§  Zinc plated for better corrosion resistance

§  Recommended for light loads and slow speeds

§  Not intended for quiet operation

§  Very cost effective

 

§  Semi-Precision

§  Made of machined steel with tighter tolerances than non-precision bearings

§  Includes a ball retainer to keep the balls separated and evenly spaced 

§  Capable of higher speeds and higher load capacities than non-precision bearings

§  Available in stainless steel

 

§  ABEC Precision

§  Made from high quality, heat treated steel and ground to a micro finish with tolerances much tighter than semi-precision bearings

§  Capable of even higher speeds and higher loads than semi-precision bearings

§  Sensitive to axle deflection which may limit load capacity in long rollers

§  Recommended for quiet operations

§  Many styles available including polypropylene housed, insert, agricultural, Framesavers, and more

 

§  Bushings

§  Solid pieces of material with no moving parts

§  Materials include UHMW, Hardwood, Teflon, Nylon and more 

§  Recommended for use in extreme temperatures, dirty environments, corrosive environments, or sanitary conditions depending on the material

 

 



 
  Contact Us  |  Home  |  Services & Training  |  FAQ  |  Employment  |  2012, Omni Metalcraft Corp.
  Site Designed by Industrial Image, Inc.  
 

Copyright 2008 Omni Metalcraft Corp. All rights reserved.
No content, data or information included within this site may be reproduced,
republished or redistributed without the prior written consent of Omni Metalcraft Corp.